Navigation

Containerised Fire Water Pump System

Containerised Fire Water Pump System

Electric Drive Fire Water Pump:

Southern Cross Iso Pro 125-100-250 with a duty of 201.3m3/h @ 80m TDH, Toshiba 75kW 2 Pole Electric Motor, AS2941-2013 Controller

Diesel Driven Fire Water Pump:

Southern Cross Iso Pro 125-100-250 with a duty of 201.3m3/h @ 80m TDH, Penske FPS756TPE2.MDA 104.8kW Radiator Cooled Diesel Engine, AS2941-2013 Controller

Electric Jockey Fire Water Pump:

Grundfos CRI 10-9 fitted with a Toshiba 3kW 2 Pole Motor, supplied with a Hydac SB400 Accumulator to AS1210

All equipment is installed within a modified 40 foot sea container. The diesel engine is installed in a sound attenuated section with a dividing firewall to the other pump sets. Sound attenuated louvres and insulated doors are also installed on the diesel side to keep the noise under 85 dBA. There are also 2 x smoke detectors, 1 per section of the container and a sprinkler system over the diesel engine. The internal of the container is supplied with lights, emergency lights and emergency exit lights. 2 sets of 2 x GPO's are also in the container.

All piping is in accordance with AS2941-2013 and customer requirements. All control panels are installed within the container and are externally accessible via weather proof doors. A monorail is installed in the electric and jockey pump section of the container to remove / install pumps and piping. All large equipment is accessible by doors around the container (engine, electric motor, pumps). All power supply wiring is taken back to a common distribution board. All communications is taken back to a common distribution board for DCS Signals and FIP Signals. Pump set is also supplied with a FM Flow Meter for testing purposes.

Enquire about our Fire Pump Systems

Other Projects

Contact Dynapumps for complete pump solutions for the life of the project

Get in Touch

Contact Us

Close