When bio-growth on a competitor’s airlift pump rendered it unusable in a landfill sump at a remarkably clean, state-of-the-art facility in the Northeast, the nationally recognized landfill installed the popular Edge Pneumatic Piston Pump™ from Blackhawk.

A Wastewater Treatment Plant faced the challenge of accommodating a growing population while adhering to increasingly stringent regulations and environmental concerns. To address these issues, they sought ways to optimise and future-proof their operations. 

Critical for Flow Chemistry and HPLC applications, the WANNER Hydra-Cell pumps deliver an extremely low pulse flow, without the need for pulsation dampeners in most applications, and with a predictable and controllable flow rate for a consistent process.

Dynapumps commends Box Rallies for achieving the incredible milestone of raising over $50 million for cancer research since its launch in 2010. This funding is crucial in supporting essential cancer research and providing benefits to cancer patients across Australia.

Dynapumps South Australia is thrilled to announce that we have established our own local Service & Repair Centre by acquiring Power Pumps & Engineering, effective July 2024. Dynapumps SA now boasts a team of highly experienced service & repair technicians with decades of experience in virtually every pump application and market sector.

A submerged Boerger rotary lobe pump has put a wastewater treatment plant back on course with what used to be a troublesome grease-sludge-basin application.

The mobile pump unit with the magnetic-drive CP pump was a solution offered as a complete package with ATEX approval for mobile use. For the current application, the mobile pump is used via an emergency power supply to empty the storage/reaction tank in case of a power blackout in the plant because the media (chlorinated and fluorinated compounds) tend to react strongly.

The technology offers efficient scale-free heating, spray drying, powder hydration and functionalization, as well as effective emulsification and gas dispersion.

With the hydra-cell pump installed, pumping corrosive salt water is reliable with minimum maintenance, creating a saving of $10K’s per year.

Easy to maintain and install, SATURNevo pumps are designed for seawater applications. They can easily withstand corrosion since they are made of FRP, a corrosion-proof material. 

In today’s energy-conscious world and in industrial facilities where unplanned maintenance calls costs thousands of dollars an hour in lost production, key steps for ensuring a reliable and cost-effective solution include making sure the vacuum pump priming system does exactly what it should and understanding what the user expects.

Dynapumps has been servicing pumps for over 40 years. Our service departments are known for their honest and dependable Vacuum Pump service. We offer responsive support, both on-site and at our fully equipped workshops in Melbourne, Sydney, Brisbane and Perth.

Seal flushing is a critical operation with Mining Engineers commonly report issues in regards to pulsation and seal wear. Free from these limitations, Hydra-Cell seal-less pumps have been increasingly preferred for seal water flush applications in the mining industry.

Chemical treatment plays a key role in maintaining trouble free operation of pipelines and well heads. Graco offers an automated solution for chemical management that can produce a rapid return on your investment.

Dynapumps recently supplied a Fire Water Pump package for The Amrun project in North Queensland.

Dynapumps will be exhibiting at Stand 141 at this years 80th WIOA Victorian Water Industry Operations Conference & Exhibition at the Bendigo Exhibition Centre, 6th & 7th of September 2017

Efficient and high performing vacuum assisted self-priming pumps complete a challenging dewatering project ahead of schedule off the coast of Norway.

The new custom-made SEEPEX pump now runs at a much lower rpm and meets all the NPSH requirements. It’s exceptionally robust since the shaft diameter is three times larger than the previous pumps and utilises super duplex stainless steel.

Dynapumps will be exhibiting at Stand 72 at this years WIOA NSW Water Industry Operations Conference and Exhibition from Wednesday 29th and Thursday 30th of March at the Exhibition Park in Canberra (EPIC).

The equipment was specifically designed and engineered to operate in the exceedingly abrasive and harsh application associated with high pressure underground mine dewatering.

Dynapumps recently exhibited at this year’s Australasian Oil & Gas Exhibition & Conference (AOG) at the Perth Convention and Exhibition Centre.

Alan MacLean has recently joined Dynapumps as Business Development Manager for Oil & Gas. Alan qualified in Glasgow as a Marine Engineer and then worked in the North Sea oil fields. He later completed an MBA in Business Administration at the University of WA.

Dynapumps recently supplied an automatic Pump Priming System for the Balonne Shire Council, 500 kilometres west of Brisbane. From start to completion, the project was monitored constantly to ensure the delivery was on schedule as requested by the Council.

Dynapumps Victoria recently designed, manufactured and supplied a MEG Cooling System to Kingspan Insulated Panels for its new manufacturing plant in Somerton Victoria.

For the seventh year running, Dynapumps will be exhibiting at this year's Australasian Oil & Gas Exhibition & Conference (AOG) at the Perth Convention Centre from the 22nd - 24th February, 2017.

The North Otago Irrigation Company required an irrigation booster system to provide access to constant water and irrigation to the community and environment.

Graco has developed into one of the leading suppliers of FDA-approved (Food and Drug Administration) pumps for the food and beverage industry, largely for high-volume food production companies.

In one of the driest parts of Zimbabwe, communities are abandoning farming in favour of raising cattle with the backing from the United Nations and a local not-for-profit organization. The village of Mathafeni, one of the driest districts in Zimbabwe, is now running borehole pumps to transport the water supply into troughs for cattle to drink. 

Dynapumps secures prestigious Multiphase pump contract utilising Leistritz twin screw pump technology.

Dynapumps are pleased with the completion of its Self-priming Pump Set for the world’s largest salt exporter. The Flowserve PT150 Self priming Pump Set is belt driven by Cummins 4BTA water cooled diesel engine.

Dynapumps designed and supplied more than forty (40) Reagent Pumps for the Runruno Gold-Molybdenum Project on the island of Luzon in the Philippines.

We are excited to present our ‘New Generation’ of Dynavac VCX Claw Pumps for oil-free vacuum and air/ gas compressor applications. Our manufacturing team has completely re-designed the VCX range resulting in extended longevity and significantly reduced noise levels.

Dynavac (Vacuum & Air division of Dynapumps) recently manufactured and installed a VCX60 Central Vacuum System (CVS) for Carnarvon Hospital, a regional health centre approximately 900kms north of Perth, Western Australia.

Dynavac have supported the Annual Organic Synthesis Symposium for the last three years and its a fantastic opportunity for the company to meet with local researchers within the organic chemistry field. At the event Dynavac had a great range of products on display from Freeze Dryers, Dry Scroll, RV vacuum pumps and air compressors.

Dynavac (Vacuum & Air division of Dynapumps) were approached to design a custom CVS system for OMEGA Watches in Sydney.  Paramount to their requirements was a short lead time of 3 to 4 weeks, and more specifically, a restricted installation space of only 450 x 400mm.

Dynapumps NSW recently purchased their latest asset, the Doosan PUMA GT2600M CNC Turning Centre from Hare & Forbes Machinery House. Since operating the new machine, the Dynapumps team have been very impressed with its performance.

The Application Manager at Grundfos, Karl Norbert Kiniger, explains when and why this occurrence can happen and how to moderate the hazards with an intelligent solution by Grundfos.

Dynavac, the vacuum and air blower division of Dynapumps are now on display at The Laboratory Managers Conference at the Brisbane Convention & Exhibition Centre.

The traditional procedures for producing Oil & Gas are effectively interchanged by a more simplified and cost-effective technology called multiphase pumping.

The global centrifugal pumps market research reports that mergers and acquisitions (M&A) have become an effective way for established players to penetrate new markets and diversify their product portfolio. These M&A activities are being increasingly seen in the pump markets in the developed countries.

The Emissions Reduction Fund is a valuable scheme that aims at providing incentives for businesses to implement new technologies to reduce their emissions. It is passed through the Carbon Credits (Carbon Farming Initiative) Act 2011, the Carbon Credits (Carbon Farming Initiative) Regulations 2011 and the Carbon Credits Rule 2015.

Dynapumps are pleased with the big news of the two merging oil & gas companies and will continue our strong business relationship by supplying quality pump products for their future projects. Recently Dynapumps completed an assignment for Baker Hughes, manufacturing an Umbilical Hydraulic Powerpack Skid (Containerised Pump-set).

Dynapumps would like to introduce the new L4NC compact screw pump from Leistritz. With focus on tank farm applications such as transfer, stripping, loading and unloading pumps. Further applications: Up- and midstream, shipbuilding and other offshore technology, chemical and petrochemical industry.

Dynavac, the vacuum and air blower division of Dynapumps will be attending The 2016 Australasian Laboratory Managers Association (ALMA) conference will be held at Brisbane Convention and Exhibition Centre from November 21 to 23.

The Dynapumps Melbourne branch are enjoying the benefits of their recent move into a larger, brand new premises just several minutes away from their previous address.

The AOG is the largest industry exhibition in Australia showcasing the latest products and innovations from over 500 exhibitors. Dynapumps maintained our presence at the exhibition in 2016 displaying our key industry solutions and holding four technical seminars for our clients across the three days. 

One of the latest of four pump packages to leave the Dynapumps yard are destined for an iron ore mine located in Western Australia. This mine will have a 55Mtpa wet processing plant which includes slurry pumps with a special Plan 54 double mechanical seal system.

Dynapumps offer a range of leak detection equipment from portable and bench mounted unit, through to mobile and dedicated component devices. Our units can be supplied for traditional Helium leak detection through to refrigerant, or multi gas models.

These LNG fire water pumps were supplied for the Wheatstone LNG liquefied natural gas plant that is currently under construction in Western Australia.

Dynapumps has found a new way to detect water contamination in the bearing chamber so that maintenance and downtime costs are minimised.

Dynapumps showcased our specialist products and services available to the Irrigation industry at what has been described as the best  industry event in years.

Dynapumps recently engineered a dual diesel containerised fire pump set for Woodside's Burrup onshore workshop facility, designed to replace and upgrade their aging system whilst keeping within the ISO Sea container footprint size.

Dynapumps was once again part of this year’s Australasian Oil and Gas Expo. The AOG was held for three days spanning Wednesday the 19th to Friday the 21st of February at the Perth Convention Exhibition Centre.

Dynapumps will again be a part of this year’s Australasian Oil and Gas Exhibition & Conference along with our key exhibition partners FMC Technologies, Netzsch, Leistritz, Grundfos & Tuthill. The exhibition will be held at the Perth Exhibition Centre from the 19th-21st February 2014. 

Dynapumps is excited to take on representation of Leistritz Pumpen GmbH for the whole of Australia, New Zealand and Papau New Guinea in 2014. Since 1924, Leistritz has produced a wide range of twin and triple screw positive displacement screw pumps at their factory in Germany.

Engineers all over the world are indebted to a very tiny percentage of the operating family of pumps for an over-abundance of analysis, discussion and confusion.

Dampier Salt a world leader in the supply of solar salt, uses Flo-Max axial flow (propeller) pumps to deliver sea-water and brine in their operations. Dynapumps supply and repair the pumps which are subject to severe conditions while pumping a highly corrosive product.

Dynapumps in conjunction with Patterson Pumps, held Technical Training Luncheons across the country discussing fire pumps and the content and differences NFPA20 & AS2914 between regulations.

Ross Mackay advises companies to start using one of the most neglected tools for pump reliability in every plant..... the Operators.

One of the most recent containerised pumps to come out of the Dynapumps workshop is the Cimeco containerised fire pump.

One of the most significant design changes introduced to the pump business in the last 30+ years is undoubtedly the large bore seal chamber.

Dynapumps Queensland attended the 38th Annual Queensland Water Industry Operators Australia conference. The comprehensive exhibition with over 100 trade sites saw companies exhibit the latest in equipment, services and process technologies available to the water, wastewater and liquid conveyancing industries.

Ross Mackay pump experts discusses some of the considerations for pump start up.

Dynapumps are investigating the possibility of inviting Ross Mackay to hold pump training seminars in Australia.

The use of single row angular contact bearings has increased considerably during recent years, but are they being installed properly in your pumps?

Despite poor weather forecasts during the week, Sunday dawned clear and cool, with the track in good condition ready for the first round of the Weld West State Road Racing Championship.

A leading University in Queensland has been commissioned to test roofing material under cyclonic conditions. The test requires a high flow of air and means of varying the delivery pressure by up to 70 hectopascals every second to simulate cyclonic conditions. Dynapumps designed and supplied a blower package with a programmable control system to deliver air at the rapid pressure variations required.

Project Aurora, located in Moranbah Queensland (190kms from Mackay), is valued at more than $700 million and will deliver a facility which will supply explosives to the Australian mining industry.

The Geodynamics Enhanced Geothermal System (EGS) Project is based in Innamincka, South Australia. The aim of this project is to harness the power of geothermal brine to generate electricity.

Dynapumps recently enjoying hosting clients and friends from First Quantum Minerals, Ausenco & Baker Hughes in our Executive Suite at nIB Stadium.

The classical symptoms are there; the unique rumbling / rattling noise and excessive vibration. But is the pump really cavitating or is it being subjected to one of the other conditions that share the same symptoms?

Dynapumps recently supplied a package of products to the site including 2 X Fire Pumps (dual electric and diesel with jockey pumps), 2 X Potable Water Pumps (dual electric and diesel) and 3 X Raw Water Pumps.

The Kwale Mineral Sands Project is located in Kenya, 50km south of Mombasa and 10km inland from the Indian Ocean. The sands have been found to contain the heavy minerals Rutile, Ilmanite and Zircon in economically viable concentrations.

Reducing costs for clients, inspiring public confidence and protecting the environment all in one solution.

For the vast majority of pumps manufactured around the world, the answer to the first part of that question is easy as the manufacturer will tell you that there should be no stresses imposed on the pump flanges by the system piping.

Dynapumps was proud to be part of this year’s Australasian Oil and Gas Expo, as we showcased the latest pump technology and advancements to benefit the oil and gas industry.

The 20th Australian Institute of Physics Congress is to be held at the University of New South Wales from 9-13 December 2012 and will be the biggest and most diverse scientific meeting of the Australian physics calendar in 2012.

Dynapumps, as agents for Graco, are excited to announce a new series of peristaltic pumps. The EP series can be ordered without a motor drive so that each pump can be customised with the most suitable motor for the application.

Dynapumps invested in the latest in 3D technology to support our customers who are dealing regularly with multi-million dollar projects.

When the Australian Synchrotron was finally complete in July 2007, the facility finally provided Australian scientists and researchers, access to a world class facility that could be used in numerous areas of research.

Dynapumps Brisbane office is gearing up to exhibit at the association's Coal Sea Gas Conference & Exhibition, to be held at the Brisbane Conference & Exhibition Centre from October 8-10th 2012.

The seminar was headed by CH Low who is the Regional Sales Manager for Patterson Pumps in Singapore. CH visited Perth, Brisbane and Melbourne to lead the training in each state. Interest in the training was high, with all venues hosting a close to full house of attendees

Dynapumps, along with their clients and friends from Ausenco, watched on from their Executive Suite at NIB Stadium as Perth Glory stormed home with a 4-1 triumph over Melbourne Victory last Sunday.

In early November Dynapumps, in conjunction with FMC Technologies, hosted a technical training luncheon covering the service & repair of FMC pumps.

Dynapumps are proud to announce a new distribution partnership with Tacmina Pumps. Tacmina has specialised in manufacturing diaphragm metering pumps for 50 years

Adamus Resources Limited, a Perth-based exploring and mine development company, continues to advance towards becoming a 100,000+oz per annum gold producer with the completion of its development of the Nzema Gold Operations in Ghana.

Correct pump selection is vital to run pumps efficiently and effectively for your application. By selecting the correct pump you can potentially save your business thousands of dollars.

In 2006 Wallis Drilling made a strategic decision to enter the CSG (coal seam gas) market and although things were fairly similar to the mineral exploration market they had traditionally been involved in there were some new challenges.

Dynapumps was a proud participant in 2011’s Australasian Oil & Gas Expo, which was the biggest oil and gas exhibition ever staged in the country with more than 450 exhibitors from some 22 nations taking part. The exhibition opened on Wednesday February 23^rd and ran for three days.

This year, the Institute of Hospital Engineers Australia (IHEA) held their 61st annual conference in Perth, at the Conference & Exhibition Centre.